Brand:	Aspire
Product Name:	Aspire Nautilus AIO Vape Pod Starter Kit 1000mAh 12W Battery with 4.5ml Cartridge
SKU:	AST003600
Type:	Starter Kit/ Vape Kit/ AIO Kit/Pod Kit
Color:	Blue, Jade, Silver, Black, Red, Purple
Launch Date:	September 19th, 2018

Aspire Nautilus AIO Kit is a slim and stylish all-in-one starter kit which comes with 1000mAh built-in battery and 4.5ml refillable pod cartridge. The Nautilus Cartridge has an adjustable airflow system, meeting your vaping preference. It comes with two famous and popular Nautilus BVC coils both rated at 1.8ohm, one for regular and one for use with salts. Together with the bottom filling system, the Nautilus Kit will offer an optimal vaping experience for you.

Size:	87.5 x 37 x 21mm
Battery:	Internal 1000mAh battery
Output wattage:	Max12W
Filling type:	Bottom Refill
Coil type:	Nautilus 1.8ohm BVC coil
Pod capacity:	4.5ml (Standard Edition)

➤ A. 1000mAh built-in battery for long-lasting vaping
➤ B. 4.5ml refillable pod cartridge



➤ C. Two famous and popular 1.8ohm Nautilus BVC coils



➤ D. Adjustable airflow system to suit your vaping preference



➤ E. Convenient bottom refilling design

✔ 1 x Aspire Nautilus AIO Device 1000mAh Battery with 4.5ml Pod
✔ 2 x 1.8ohm BVC Coils (1 Regular BVC & 1 for Nic Salts)
✔ 2 x Extra O-rings
✔ 1 x Silicone Seal
✔ 1 x Micro USB Cable
✔ 1 x Warranty Card
✔ 1 x User Manual

A. How to install Aspire Nautilus BVC Coil?
Whatever type of coil you use, the standard Nautilus BVC or the s Nautilus BVC, both are easy to install. Simply remove the pod by squeezing the side buttons on the device, then remove the pod and turn it upside down, remove the chimney unit and screw in your chosen coil. Replace the chimney unit with attached coil and reinsert into the pod. Push the pod back into the Aspire Nautilus AIO until it clicks.
NOTE: when inserting a new coil and filling the pod, always let the device stand for 3 minutes to allow the coil to become saturated. This will help avoid dry hits and damage to the coil.



B. How to fill Aspire Nautilus AIO?
Refilling the pod is super easy. Remove the pod from the device by squeezing the two side buttons, invert the pod and remove the silicone plug from the 4.6 diameter filling hole. Fill the pod with , and replace the silicone plug securely. Replace the pod into the device by pushing down until it clicks into place, and it’s ready.



C. How to charge Aspire Nautilus AIO?
Charging the Aspire Nautilus AIO is also very simple. Just plug in the supplied micro USB cable into the side of the mod, attach the other end to a suitable power supply to charge. The maximum charge current can reach up to 1A. When attached to the USB with the power on the LEDs will flash blue and orange three times, when fully charges the LEDs will flash blue and orange twenty times then remain off.

❤ Please read the user manual carefully before using this Aspire Nautilus AIO Vape Pod Starter Kit.
❤ The Aspire Nautilus AIO Pod, Aspire Nautilus AIO Coil, Aspire Nautilus BVC Coil are also available in Cloumix.

☞ 6 months warranty period for Aspire Nautilus AIO Vape Pod Starter Kit.